BDJQB - STABOND HT-4 (FIREWALL SEALANT)
- MSDS: BDJQB
- Manufacturer: STABOND CORP
- Product Name: STABOND HT-4 (FIREWALL SEALANT)
- National Stock Number: 8030-00-209-0602
Product Identification
Product ID:STABOND HT-4 (FIREWALL SEALANT)
MSDS Date:01/01/1985
FSC:8030
NIIN:00-209-0602
MSDS Number: BDJQB
Responsible Party
Emergency Phone: 213/ 770-0591
Cage: GO049
Contractor
Telephone: (213) 770-0591
Cage: GO049
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 0.03%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE
CAS: 1332-21-4
RTECS: CI6475000
Fraction By Weight: 33%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.5 FIBERS/CC; A1;89
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 30%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:MAY BE NARCOTIC IN HIGH CONCENTRATIONS.
First Aid
First Aid:REMOVE FROM EXPOSURE.
Fire Fighting
Flash Point:82F T.C.C.
Lower Limits:2.2
Upper Limits:7.0
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:TREAT AS FLAMMABLE SOLID IN WET STATE.
Accidental Release
Spill Release Procedures:WET MATERIAL SHOULD BE PLACED IN A METAL
CONTAINER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR HEATING EQUIPMENT.
Other Precautions:DO NOT EXPOSE WET MATERIAL TO OPEN FLAME OR SPARKS.
Exposure Controls
Ventilation:MECHANICAL REQUIRED WHEN APPLIED TO LARGE SURFACE AREAS
Protective Gloves:RECOMMENDED
Supplemental Safety and Health
14010 S. WESTERN AVENUE / GARDENA, CALIF. 90249.
Chemical Properties
HCC:T4
Boiling Pt:B.P. Text:280F
Vapor Pres:10
Vapor Density:3.66
Spec Gravity:1.25
Evaporation Rate & Reference:0.6, BUOAC=1
Solubility in Water:<1%
Appearance and Odor:HIGH VISCOSITY PASTE, AROMATIC HYDROC. ODOR
Percent Volatiles by Volume:45
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT STORE NEAR OXIDIZING MATERIALS.
Disposal
Waste Disposal Methods:BURY WET MATERIAL IN SEALED METAL CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.